Jump to content
  • Sign Up to reply and join the friendliest Watch Forum on the web. Stick around, get to 50 posts and gain access to your full profile and additional features such as a personal messaging system, chat room and the sales forum PLUS the chance to enter our regular giveaways.

Recommended Posts

ICIM10tXt97bXHJVJzqccEi4MknMw93wdXAMwi5x

This belongs to Penelope, a friend of mine, who inherited it from her parents. It's been sitting, broken and idle, on her kitchen shelf for a long time, but we were talking about it the other day and I said I would have a look and see if there was anything that could be done to make it work.

The first thing I discovered was that at some point it had suffered a heavy blow and the inside of the case had three pieces broken off where the mechanism bolts on. Fortunately, all the pieces were still there so Araldite sorted that out. I straightened out a couple of important bits that were bent, bought 4 metres of appropriately dated flex and started it up - it works!

At some point Penelope has decided to paint it cream but regrets that decision, so I scraped all the cream paint off to restore the beautiful green bakelite to it former glory. The only thing I am missing is the brass bush which fits on to adjust the hands. The electric motor needs to be started by pushing this bush in and that's difficult with the case back on as there's not enough of the metal bar, to which the bush attaches, protruding to get a purchase on.

But I think it's a very lovely thing and it's wonderful that a piece of 80-year-old technology still chugs away to itself.

  • Like 2
  • Thanks 1
Link to post
Share on other sites

Yes, the dial is pretty good. I had to straighten out a dent right in the centre, where the hands' spindle protrudes. Whatever accident had caused the damage had broken the centre of the case where the motor is mounted, dented the dial and bent the hands' spindle and the starting spindle.

We had an identical clock when I was growing up in the 1960s and I well remember its idiosyncrasies. When working it kept excellent time - I understand that it is governed by the National Grid's 50 Hertz rate - but as a synchronous motor without an automatic starter, it needed to be started by hand and could be temperamental. I have a vague recollection of it occasionally choosing to go backwards.

I don't remember the going of ours - I think around the time my dad retired, just as I started work, got married and left home (mid 1970s), he decided to renew quite a lot of the household items and a wind-up chiming wall clock appeared in the room where our old Smiths Sectric had hitherto been whirring away quietly to itself.

Edited by Wowbagger
Punctuation correction
  • Like 1
Link to post
Share on other sites

I love the styling of it, I'm sure Penelope will be delighted with what you've achieved with it and will treasure it.  It looks fabulous for its age - I wish my face was doing as well.

I have a similar looking/era clock at my parents that's been unearthed that I don't remember ever seeing before, but it's a much wider wooden thing with similar lines - a huge hunk of a thing, but I did wonder if it might still go and clean up well.  

  • Like 1
Link to post
Share on other sites
57 minutes ago, BooJewels said:

I love the styling of it, I'm sure Penelope will be delighted with what you've achieved with it and will treasure it.  It looks fabulous for its age - I wish my face was doing as well.

I have a similar looking/era clock at my parents that's been unearthed that I don't remember ever seeing before, but it's a much wider wooden thing with similar lines - a huge hunk of a thing, but I did wonder if it might still go and clean up well.  

If you like old electric clocks, have you seen John_d's work on his Ferrantis?

They're lovely too. 

 

  • Like 1
Link to post
Share on other sites

Oh my goodness, I got all emotional when I saw the first one restored, it's gorgeous - I'll read the rest later. 

I'm going to have to pay more attention to the box of old clocks I put aside to go through - although I think they're all wind ups, apart from this behemoth on a shelf I found - that does have a cable attached - which is why it's still on a shelf, out of reach, the cable was snagged on something we couldn't reach, so we left it in place for now.

Thanks for the link - I keep going down rabbit holes on this place, finding interesting stuff to read.

  • Like 2
Link to post
Share on other sites
10 hours ago, BooJewels said:

Oh my goodness, I got all emotional when I saw the first one restored, it's gorgeous - I'll read the rest later. 

I'm going to have to pay more attention to the box of old clocks I put aside to go through - although I think they're all wind ups, apart from this behemoth on a shelf I found - that does have a cable attached - which is why it's still on a shelf, out of reach, the cable was snagged on something we couldn't reach, so we left it in place for now.

Thanks for the link - I keep going down rabbit holes on this place, finding interesting stuff to read.

I'm going to add another rabbit hole entrance......... Having now restored 11 of these vintage synchronous clocks I felt that I 'needed' a small Bakelite radio to complement them....

I initially bought this rather 'tatty' Ultra U 405, post-war radio (1947), and restored it,

MR6JJ2V.jpg

Then one thing led to another and this second slightly earlier offering, ( Ultra T401,1945), was acquired and also restored to working order, and then there were two.......

XfabacJ.jpg

I have since replaced the knobs on the upper radio with a more suitable set.....

veQ2xX3.jpg

 

I then remembered that 30 or 35 years ago I picked up a Marconiphone P20B midget battery valve portable, also from 1947, so while I was on a roll I retrieved it from the cupboard that it has been hiding in for longer than I care to remember...

qF6xKYr.jpg

It had a couple of valves missing, but surprisingly these were sourced on eBay very cheaply, the whole set of 4 costing less than a fiver! The battery connector was in a bit of a state, but that was easily fixed.....

RaSnuor.jpg

As this set was designed to run on a combined HT (69v) and LT(1.5v) battery, which is no longer manufactured, the choice is to either make a mains driven battery eliminator pack or reconstruct a 'correct' battery, populating it with eight, series connected, PP3 9v batteries, giving a nominal 72volts, for the HT, and a single alkaline 1.5v 'C' cell for the valve heaters.

I chose the latter option.......

W7tAQE7.jpg

The set now lives again......

'Cover girl' in 1949...

U8Z9Ug7.jpg

  • Like 1
Link to post
Share on other sites

You've done a beautiful job with the radios - it's astonishing how well the Bakelite comes up with some attention - it looks like mahogany - positively glows.  I imagine that it might get brittle over time though.  I'm pretty sure that my Grandfather had a radio like those in his office (they lived in an old mill building that was also their business premises above) and another on the factory floor - it looks very familiar to me.  We used to listen to horse races in the afternoon - he'd give me pennies to bet with and good tips and my horses always seemed to win!  The way I'm finding old junk clearing my parents' house, I'll probably turn the blooming thing up.  If I do, you can have it.

I love the Woman's Own cover - him digging - in a tie - and her just looking lovely - and yet totally contemporary.

 

Link to post
Share on other sites
5 minutes ago, Wowbagger said:

6miJLZrTA88AhWpcAv06MtUvrTDzbyJQX8EBEB7A

Back at home in Penny's house. The goose egg was from her parents' place in Camerton, Somerset, and Penny blew it herself, more than half a century ago, I think.

The green Art Deco look is evocative of the late1930's but the Smiths Sectric ones were actually manufactured in the 1950's. My green alarm version here....

TFsLrQI.jpg

It would be quite easy to remake the setting button, if it is totally missing, any piece of rigid plastic rod, suitably drilled to fit over the existing spindle, Araldited in place, as long as it doesn't stop you getting the back off.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...